Auto Attendant IVR

Auto Attendant IVR

Auto Attendant is your virtual receptionist that can both greet and redirect all inbound calls to other departments.

With Auto Attendant you can:

  • Greeting only: play the greeting message then post dial any lower priority features such as Call Queue or Hunt groups (see – Greeting Only below).
  • Call Forward: redirect the calls to other departments following the initial greeting message (eg press #1 for sales, #2 Accounts…etc).
  • Set a time for response time, before the Auto Attend message replays.
  • Choose how many times to replay Auto Attend message, before the calls get directed to the number Auto Attend is set up on.
  • Use time schedules to set when your auto attendant in be active.
Setting up Auto Attendant – Greeting Only
  1. Log in to your Account.
  2. Select Switchboard.
  3. Select Your Number.
  4. Select Inbound.
  5. Toggle Auto Attendant.
  6. Record a greeting, or Upload a file.
  7. Select Active and a time frame.
  8. Select Caller response time (in seconds).
  9. Select Repeat Greeting.
  10. Set “Connect to your number as normal…..” to enable post-dialing.
  11. Select Save to save all changes.
Setting up Auto Attendant with Call Forwarding
  1. Follow the above steps for Auto Attendant, Greeting Only.
  2. Select caller options and redirect them to a nominated phone number.
  3. Toggle Extension Dialling (if required).
  4. Select press for extension (if required).
  5. Select Save to save all changes.

Note: If you are planning on using extension think about creating cohesion with your extension dialling numbers.

    • Related Articles

    • Recording an Auto Attendant Greeting

      Auto Attendant is your Virtual Receptionist that can both greet and redirect all inbound calls to other departments. You can use our system to record your own greeting. Log into your account. Go to Switchboard and select the number that you would ...
    • Auto Attendant to a Call Queue

      This solution links the main office number to an Auto Attendant, which links to a Call Queue following completion of the Auto Attendant greeting. To do this you will require at least three numbers. Step 1: Main office number: Log into your account. ...
    • Bootcamp 2 - Manage Your Inbound Calls

      In this second bootcamp, we’re looking at how our service helps you manage your inbound calling with its CloudPBX features. Direct your call. Understand Auto Attendant. Call Flow Priority. Setting up Voicemail to email. Adding Media files. Direct ...
    • Polycom VVX – Auto Provisioning your phone

      Our “Device Provisioning” platform enables you to provision any Polycom phone from the VVX family. If you have purchased a handset with our provisioning URI installed go to Step 4 below. Step 1: The VVX family phones Web UI Log into the phones Web ...
    • Problems with DTMF

      If you are reporting that your IVR is intermittently failing when pressing the menu selections of your Auto Attendant, it is highly likely that the in-house PBX has a DTMF issue. In summary, you’ll need to ensure you are supporting RFC2833 and not ...